SodaStream Air Gun for 30mm neck
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
With different ring.
- Rating
- 0 / 5
- Likes
- 24
- Downloads
- 114
- Makes
- 0
- Views
- 1,449
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Public Domain
I took the brilliant design from PALM and fitted the ring to my 30mm bottle neck.
The grip is more stable with it, but you can't screw it on the bottle as one piece.
You need to mount the ring first, then screw the valve on the bottle and connect it to the ring.
The print file is with a brim (because why not), low speed on the first layer and heats up the nozzle after leveling.
I made it from PLA using this settings:
Button
0.15 layer height
100% infill
Head
0.15 layer height
30% infill
Lever
0.15 layer height
30% infill
Pin
0.15 layer height
100% infill
Ring
0.15 layer height
30% infill
Had no TPU, so I used o-rings for the sealings.