Animal Coasters - HueForge
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Animal Coasters
- Rating
- 5 / 5
- Likes
- 96
- Downloads
- 352
- Makes
- 2
- Views
- 2,273
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution — Noncommercial
It can be a little tricky to fit them in the coaster. You should also add a tiny drop of glue to keep them from sliding around once they're in.
OWL:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA+ Sunlu Black
PLA+ Sunlu Red
PLA+ Sunlu Copper
PLA PolyTerra Sunrise Orange
PLA+ Sunlu White
Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to Red
At layer #12 (1.04mm) swap to Copper
At layer #18 (1.52mm) swap to Sunrise Orange
At layer #21 (1.76mm) swap to White for the rest.
FOX:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA+ Sunlu Black
PLA PolyTerra Sunrise Orange
PLA+ Sunlu White
Swap Instructions:
Start with Black
At layer #4 (0.4mm) swap to Sunrise Orange
At layer #8 (0.72mm) swap to White for the rest.
SHARK:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA+ Sunlu Black
PLA+ Sunlu Blue
PLA+ Sunlu Grass Green
PLA+ Sunlu White
Swap Instructions:
Start with Black
At layer #4 (0.4mm) swap to Blue
At layer #7 (0.64mm) swap to Grass Green
At layer #10 (0.88mm) swap to White for the rest.
DRAGON:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA+ Sunlu Black
PLA+ Sunlu Red
PLA+ Sunlu Pure Yellow
PLA+ Sunlu White
Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to Red
At layer #11 (0.96mm) swap to Pure Yellow
At layer #15 (1.28mm) swap to White for the rest.
BEE:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA+ Sunlu Black
PLA+ Sunlu Red
PLA+ Sunlu Pure Yellow
PLA+ Sunlu White
Swap Instructions:
Start with Black
At layer #4 (0.4mm) swap to Red
At layer #8 (0.72mm) swap to Pure Yellow
At layer #14 (1.2mm) swap to White for the rest.
HUMMING BIRD:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA+ Sunlu Black
PLA+ Sunlu Blue
PLA+ Sunlu Grass Green
PLA+ Sunlu Pure Yellow
PLA+ Sunlu White
Swap Instructions:
Start with Black
At layer #5 (0.48mm) swap to Blue
At layer #6 (0.56mm) swap to Grass Green
At layer #9 (0.8mm) swap to Pure Yellow
At layer #15 (1.28mm) swap to White for the rest.