Filament spool holder for Ikea SKADIS
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Filament spool holder for Ikea SKADIS.
- Rating
- 5 / 5
- Likes
- 87
- Downloads
- 418
- Makes
- 2
- Views
- 2,630
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial
I HAVE NEW AND MUCH BATTER VARIANT OF THE HOLDER. PLEASE FOLLOW THE LINK.
I have tried few different spool holder solutions for Skadis but I wasn't happy, I needed something simple and decided to make my own. I have 76 cm and 36 cm boards mounted next to each other so I needed at least three holders to hold the weight.
I made two holder models, one is just mirrored version of another, it is needed if holders are mounted on opposite sides of the Skadis boards.
I used 22 mm wooden rods, I oiled them with linseed oil, but it is not necessary. I also made end stops for the rods. Those are not necessary since rod is held pretty tight, it just looks nicer. I used 3 mm wood screws to hold them connected to the rod.
I printed holders in PETG and PLA, both works just fine.
Supports are needed for L shaped hooks.