JDM Tuner Concept Car HueForge
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
HueForge print of a JDM Tuner Concept Car
- Rating
- 0 / 5
- Likes
- 17
- Downloads
- 50
- Makes
- 0
- Views
- 471
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A HueForge print of a JDM style concept car.
The original is almost 8" x 8" - You can resize the X & Y dimensions if you want but do not change the Z or you will reduce the layers and the swaps below will not be accurate. I printed mine 5" x 5" and used this frame off Amazon
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA Overture Red Transmission Distance: 1
PLA Overture Orange Transmission Distance: 2
PLA Overture Yellow Transmission Distance: 11
PLA Zyltech White Transmission Distance: 6
Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Red
At layer #12 (1.04mm) swap to Orange
At layer #14 (1.2mm) swap to Yellow
At layer #16 (1.36mm) swap to White for the rest.
Image by HANSUAN FABREGAS from Pixabay