Mini Vertical Arcade Machine
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Wanted a vertical mini arcade so I modded "Mini Arcade Machine" by iClint. I did change it to use all M3 bolt's except…
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 48
- Makes
- 0
- Views
- 403
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial
Wanted a vertical mini arcade so I modded "Mini Arcade Machine" by iClint. I did change it to use all M3 bolt's except the M2.5's for the SD extender. Also cleaned up some spacing so thing fit better. Check the "Needed parts" for a list of things for this build. The only thing I left off was some speaker wire and needed SD card.
Made 2 Bezel's. One for BigTreeTech's TFT7" and one for the common one's that are out there. The BTT one is nice because it has mounts for Pi right on the back of the screen.
Added volume control and on/off switch. Put a female USB-C on the back so you could power it off a power bank or a plug in power supply. Put a USB port in front for keyboard or controller.
One more thing. Added a remote SD card slot so you can change cards easily.
Enjoy!
Print Settings
Printer:
Folgertech FT-6
Rafts:
No
Supports:
No
Resolution:
.26
Infill:
10%
Filament:
Hatchbox and ZYLtech PLAN/A
Notes:
Used 4.0 step over so the chamfers come out better. I did use supports on the control deck.
Category: Video Games