1 / 5
Power outlet cover / Auslassdosen Abdeckung
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A small cover for "strange" power outlets with roughly 27x40mm
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 11
- Makes
- 0
- Views
- 158
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
I found some outlets, that were missing its covers. I don't know the vendor or the exact name of the parts that I needed, so I designed them.
I think they should work just fine with any filament, as the outlets should not carry any current whilst the cover is applied. It took around 6.5g of filament with my settings, so mass producing shouldn't be an issue.
I configured a different base layer shape as seen in the screenshots, which looked quite nice, as the parts may be seen over months or years.
Update 2023.01.04:
- Updated the chamfer of the clip-arms things. It's not 1mm from the side, to have a better fit.
- Added a small rim to the outline to even out offsets between wall and cover