1 / 2
ZeroG Mercury One.1 Tensioner Blocks
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Tensioner Blocks for the ZeroG Mercury One.1
- Rating
- 5 / 5
- Likes
- 47
- Downloads
- 219
- Makes
- 2
- Views
- 2,130
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
These tensioner blocks are an alternative for the standard tensioner plates. The standard tensioner plates would not work with the enclosure as the door would collide with the screws. These blocks press fit into the Y extrusion and bolted into the top of the 2040 extrusion. This also gives a cleaner look to the 2040 extrusions as the tensioner blocks will cap them off.
Hardware needed:
- M3 screws and washers (from the original BOM)
- 2 M5 x 10 mm SHCS (to bolt them into the 2040 extrusion)
Print settings:
- Layer height: 0,2 mm
- Perimeters: 4
- Top/Bottom Layers: 5
- Infill: Grid 40%