1 / 4
Remixed Polaroid Frame with Nail Hole
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A sleek Polaroid frame following the original design, now with a nail hole to hang it on your wall and more improvements
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 123
- Makes
- 0
- Views
- 486
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Wall-mounted
- License
- Creative Commons — Attribution — Share Alike
An upgraded version of Deluxe Designs Polaroid frame, which features a nail hole of 5mm so you can hang it on a wall. The Polaroid slides in from the top and is centered by the frame.
The frame works for the Polaroid 600 film and all films with the same dimensions.
Print Settings
- Any filament should work fine :)
- VERY GOOD LAYER ADHESION IS REQUIRED!
- Two perimeters should be sufficient, ~10% infill worked well for me.
- Depending on how good your printer handles bridging, I recommend tree support for the “window”.
Please consider liking and posting a make if you find this useful 🙂