Compact Retro Screwdriver Keychain
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€1.01 – €1.23 net (excluding VAT)
For file: Compact_Retro_Screwdriver_Keychain_Base_I_0.4n_0.2mm_PETG_MINIIS_1h13m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.12 excluding VAT (range midpoint).
- Weight reported by the author
- 13 g
- Print time reported by the author
- 1.21 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Tiny but compact screwdriver with bit set holder. Seven! bitheads can store.
- Rating
- 5 / 5
- Likes
- 27
- Downloads
- 144
- Makes
- 1
- Views
- 630
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Share Alike
First!
Be sure to print out the tolerance tester first.
The size of the bit heads is quite different, even if it seems standard at first, and the tolerance it can also depend on the setting of the printer, the accuracy and the material chosen.
In any case, the tolerance size you choose should be comfortable for insertion and removal, but not loose
Second!
Print it out, and glue it the magnet inside. If you want the cap to roll off less easily, use an o-ring.
Tip!
If the set of bits is not uniform at all, then a slight sanding of the edges can help to remove enough from the bitheads to be able to use them comfortably. You don't need to sand a lot.
BOM:
- Magnet 5x2mm
- Bithead
- O-Ring (Optional)
- Key Ring (Optional)
Print settings
- Material: Several Type Petg/PLA, but i think Petg better choices.
- Nozzle: 0.4mm
- Layerheight: 0.2mm STRUCTURAL
- Perimeters: 4-5
- Support: No (Only Cap, if you want, the inside comes out a little nicer.)
Essentially, the idea, and magnet and o-ring etc is from here, but this is not a remix.
https://www.printables.com/model/606404-mini-bit-driver-keychain
Thanks Man!