securing buckle / Sicherungs Schnalle
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€3.06 – €3.74 net (excluding VAT)
For file: flat securing buckle 25mm_0.4n_0.2mm_PETG_MK3S_3h42m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €3.40 excluding VAT (range midpoint).
- Weight reported by the author
- 39 g
- Print time reported by the author
- 3.7 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
To secure an elastic to a CPAP hose.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 56
- Makes
- 0
- Views
- 233
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Fashion Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This buckle is for elastics. It is used to tigthen a cpap hose to a elastic
For universial use I included severel versions.
The example is the 12mm version. The naming is according to the width of the used strap.
The printing settings are in the all version. (layer 0.2 / perimeter 5 / enable support / PETG )
Die Schnalle wird verwendet um einen Gummizug an einem CPAP Schlauch zu befestigen.
Es sind mehrere Versionen vorhanden.
Im Beispiel ist das Bild von der 12mm Version. Die Benennung erfolgt nach der verwendeten Gurtbreite.
Die Druckeinstellungen sind in der “all” Version eingestellt. (layer 0.2 / perimeter 5 / enable support / PETG )