1 / 4
Magnetic diamond file holder
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I kept knocking my old file rack over and scattering files everywhere. Magnetics to the rescue!
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 16
- Makes
- 0
- Views
- 128
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This a two-piece model and a very easy print. The cylinder has a cutout for an 18mmx3mm magnet, but it's big enough to use other sizes. I've included two (loose) alignment pins to help glue on the base once you've placed the magnet (I glued mine in). All gluing was done with CA glue. I've included a model without my logo, in case you're not interested in stoking my ego.
The one in the photos was printed at 0.28 mm layer height, 2 walls, 5% infill.
It would be great if you share your make(s).