Lasercut Skadis for Bambu P1S
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Lasercut Skadis pegboard panel to fit the side of a Bambu P1S
- Rating
- 0 / 5
- Likes
- 50
- Downloads
- 89
- Makes
- 0
- Views
- 2,092
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bambu Lab Parts & Upgrades
- License
- Creative Commons — Attribution
Lasercut (from 3mm acrylic) panel is Skadis-compatible, albeit a bit thinner. I used 3mm acrylic.
Mounting spacers are printed, and secured to the Bambu with 3M VHB double-sided tape.
You need 4 M3 square nuts and 8mm bolts to attach the panel to the spacers.
I use this with the wonderful T-Clip system, I've included a T-Clip with the right length for 3mm acrylic.
The other bits here are:
https://www.printables.com/model/695410-cutter-holder-for-skadis-t-clip
https://www.printables.com/model/695385-parametric-tray-for-t-clip-with-locating-pins
https://www.printables.com/model/695395-parametric-tray-for-t-clip-with-locating-pins-and-