1 / 1
Bosch Schleif-Block/Schwamm Halterung I sanding sponge stand — image 1

Bosch Schleif-Block/Schwamm Halterung I sanding sponge stand

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Bosch Schleif-Block/Schwamm Halterung I sanding sponge stand

Rating
0 / 5
Likes
6
Downloads
31
Makes
0
Views
294
Reviews
0

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution — Noncommercial

Easy storage for up to 9 sanding blocks in my case from Bosch. It sits firmly because the dimensions are exactly the same as the block, but this is not a problem with a sponge. I have therefore screwed my holder to a shelf with two screws so that the blocks can be easily removed.

Dimensions of my sponges: 100mmx25mmx7mm

I printed with a layer thickness of 0.1mm and a wall thickness of 0.8mm.

Einfache Aufbewahrungsmöglichkeit für bis zu 9 Schleifblöcke, in meinem Fall von Bosch. Der Halter sitzt gut, weil die Maße genau so sind wie die Blöcke, aber mit einem Schwamm ist das kein Problem. Deshalb habe ich meinen Halter mit zwei Schrauben an einem Regal befestigt, damit man die Blöcke leicht herausnehmen kann.

 

Die Maße meiner Schwämme: 100mmx25mmx7mm.

Gedruckt habe ich mit einer Schichtstärke von 0,1mm und einer Wandstärke von 0,8mm.

Tags