1 / 1
Bosch Schleif-Block/Schwamm Halterung I sanding sponge stand — zdjęcie 1

Bosch Schleif-Block/Schwamm Halterung I sanding sponge stand

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Bosch Schleif-Block/Schwamm Halterung I sanding sponge stand

Ocena
0 / 5
Polubienia
6
Pobrania
31
Wydruki
0
Wyświetlenia
294
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial

Easy storage for up to 9 sanding blocks in my case from Bosch. It sits firmly because the dimensions are exactly the same as the block, but this is not a problem with a sponge. I have therefore screwed my holder to a shelf with two screws so that the blocks can be easily removed.

Dimensions of my sponges: 100mmx25mmx7mm

I printed with a layer thickness of 0.1mm and a wall thickness of 0.8mm.

Einfache Aufbewahrungsmöglichkeit für bis zu 9 Schleifblöcke, in meinem Fall von Bosch. Der Halter sitzt gut, weil die Maße genau so sind wie die Blöcke, aber mit einem Schwamm ist das kein Problem. Deshalb habe ich meinen Halter mit zwei Schrauben an einem Regal befestigt, damit man die Blöcke leicht herausnehmen kann.

 

Die Maße meiner Schwämme: 100mmx25mmx7mm.

Gedruckt habe ich mit einer Schichtstärke von 0,1mm und einer Wandstärke von 0,8mm.

Tagi