ELFA Case (magnetic)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple ELFA Case using 4 5x3mm magnets to store your vape and an additional pod.
- Rating
- 5 / 5
- Likes
- 29
- Downloads
- 240
- Makes
- 1
- Views
- 1,568
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Printed on a Bambu Lab A1, 0.2mm Standard profile, but changed speed settings as followed:
Outer wall speed: 150mm/s
Inner wall speed: 200mm/s
But you can also use your speed settings - My idea behind the changes was to maintain a consistent outer wall speed (excluding overhangs and finer structures). The print was done with PLA-CF.
To ensure both case parts stay together, you need to press/glue in 4 5x3mm magnets. After that, you're ready to go. The spare pod is simply slid into the round bearing and then stored in the larger recess of the base.
Have fun.