Counting matching models…
Tiefenstop Einsatz für Festool Systainer Sys3 mit Deckelfach. Wird eingeklebt. Der Inbusschlüssel wird von unten mit einem Magnet gehalten. Tiefenstop→Wolfcraft Filament: Verbatim grau PLA
Print approx. €0.92–€1.12 excl. taxPreliminary estimate for one variant
Kegelsenker Einsatz für Festool Systainer Sys3 mit Deckelfach. Wird eingeklebt. Kegelsenker 1: 12.4mm Kegelsenker 2: 16.5mm Wenn der große Kegelsenker kippelt kann unter dem Schaft eine Stütze eingeklebt werden. Filament: Verbatim grau PLA
Print approx. €1.28–€1.57 excl. taxPreliminary estimate for one variant
Hakendreher Einsatz für Festool Systainer Sys3 mit Deckelfach. Wird eingeklebt. Ich wollte den Hakendreher von Festool unbedingt im Deckel haben: Damit der in den Deckel passt, muss er leider mit einem Winkelschleifer oben/unten etwas…
Print approx. €0.51–€0.63 excl. taxPreliminary estimate for one variant
Used to keep the vertical Elfa profiles from gliding sideways without drilling holes. To be glued with double-sided tape and fastened to profile with an M5x15 (or 5x20) countersunk screw.
This is a 3D-printable shelf bracket designed to fit Elfa wall double rails . It’s available in two lengths — 150 mm and 240 mm (total length including hanging hooks)—and in two versions : With stopper – helps prevent items (e.g. skis,…
2 Schächte für Target Cards im Maß 85x55mm entweder selber gedruckt oder über ein Projekt von mir. https://3d-druck-typ.xo.je/target-cards
Made to fit a standard sorting box. I printed this in PETG with a 0.4 nozzle, 0.25 layer height, STRUCTURAL, 4 vertical perimeters. Print two for each box, and mirror one of them.
Eine Sammelbox für Kleinteile. Aufgrund der Schrägung in den Fächern lassen sich kleine Teile leicht entnehmen. Bei den herkömmlichen Boxen sind meist die Finger zu groß um die Kleinteile fassen zu können. Mit den abgeschrägten Fächern…
Simple, does what it says. You will also need to print two of these Elfa Pegboard Clips . The pens are canted-out a few degrees to make them easier to grab.
Does what it says. Designed specifically for a TI-1250 vintage calculator. Probably would work for lots of smallish calculators though. Requires 2 of these Elfa pegs also.
A simple, light-duty hook that creates a small (3mm) light duty hook through two holes in an Elfa-brand pegboard. I also have designed a heavier duty version.
A simple, heavyish-duty hook that creates a small (3mm) light duty hook through two holes in an Elfa-brand pegboard. I also have designed a light duty version.
Fan Holder for ELFA Thread shelf (Trådhylla) that fits a 120mm computer fan. For cooling where it might be needed. Personally I use it to keep my reciever cool.
A mount for up to 3 ELFBAR vapes. I mounted it on the bottom of my monitor-raiser but you can also mount it under a desk.
A mount for an ELFBAR vape. I mounted it on the bottom of my monitor-raiser but you can also mount it under a desk.
A case for the elfa-stick. Possibility to put in a M5 washer, so it will be able to be put on magnetic phoneholder in your car. Eine Hülle für den elfa-stick. Die Bohrung auf der Innenseite ist für eine M5-Unterlegscheibe. Damit haftet…
Elfa Spool Holder: Your Sewing Space's New Best Friend Tired of tangled threads and scattered spools? This 3D-printable Elfa Spool Holder is the perfect solution. Designed to fit seamlessly onto your existing Elfa skid, it provides a…
You will need a pair from the elfa clips from this model https://www.thingiverse.com/thing:4060473
You can get the elfa hooks here . They should keep it stable as the original version.
For the original, smaller sized, spool support, visit the original model at Thingiverse .
Elfa Shelf Bracket Holder / Cover for metal brackets Great for storing Long items like skis, snowboards, lumber, etc. The covers snap snugly onto metal Elfa Ventilated Shelf Brackets Included a few STLs so you can size how you want. Main…
Thanks to @ericsnis for doing all the original measuring of the hook. However, their model was too (almost) perfect a recreation of the injection molded part. I redesigned it to be more 3d printable, while also changing the mounting…
Simple clothing hook. Clips on to the Elfa wire shelves that the Container Store sells for custom closets. The hook can slide forward to hang things or backwards to be out of the way. Able to hold a shirt, pants or hat. Not for heavy…
Should print standing up without supports (made sure to not have angles over 60 degrees from the bed). Also provided it's a large version that should work to hold a mallet as long as it's made of rubber or wood, I think that a metal…
I've tried a number of different approaches to hanging my pliers and nippers and none of them really satisfied me. I think that finally inspired me to take another approach and this time, I think I'm close to what I was hoping for. After…
Für Ablage von Vape, Münzen eine Ladekarte und ein Fach für Geldscheine wenn man welche hat :P Passt genau genug, kein rutschen oder ähnliches, aber könnte besser sein. Druck: fürs Auto muss Hitzebeständiges Filament Genommen werden (ich…
I wanted to have a platform to put the model planes I have, so I made a little Elfa surface for it. As all my Elfa stuff, you need a pair of those . Measures around 170x170mm (7x7 inches), also included the step file since it's pretty…
You will need two pairs (or one if you want to try) of Elfa Modular Clips at https://www.printables.com/model/60471-clip-module-pair-enforced-remix-for-elfa-pegboard. Designed to hold a Samsung Galaxy Tab S6 Lite, but will also…
You will need a pair of Elfa Modular Clips at https://www.printables.com/model/60471-clip-module-pair-enforced-remix-for-elfa-pegboard The spouse wanted an "arsenal" of Elfa pegboard accessories to choose from. This is a little shelf I…
You will need a pair of Elfa Modular Clips at https://www.printables.com/model/60471-clip-module-pair-enforced-remix-for-elfa-pegboard Opening for remote is 52.5mm across x 8mm thick.
You will need one pair of Elfa Modular Clips at https://www.printables.com/model/60471-clip-module-pair-enforced-remix-for-elfa-pegboard Modeled around a Samsung A15 with a case on. Other phones may fit, as long as the width is 85mm wide…
You will need a pair of Elfa Modular Clips at https://www.printables.com/model/60471-clip-module-pair-enforced-remix-for-elfa-pegboard Supports will be needed.
Es kann supportfrei auf einem XL Drucker gedruckt werden. Leider ist es zu gross für einen MK Drucker. Bitte mit PETG, ASA oder ähnlich Drucken, PLA wird sich im Sommer verformen. Wenn eine andere Fachunterteilung gewünscht wird, bitte in…
Ein eleganter Gridfinity-Halter im 2×3-Format, entworfen für maximale Funktionalität: Er bietet sicheren Platz für 8 Pods und zusätzlich Stauraum für 9 Fläschchen à 10 ml Liquid – alles übersichtlich organisiert und stets griffbereit.…
NEW IMPROVED VERSION This is a snug-fitting case for reusable Elfbar Elfa vape pens, designed with two main goals in mind: Prevent leaking cartridges from making a mess in your pocket or bag. Trap the strong smell that some cartridges…
This is a snug-fitting case for reusable Elfbar Elfa vape pens, designed with two main goals in mind: Prevent leaking cartridges from making a mess in your pocket or bag. Trap the strong smell that some cartridges emit, especially for…
This remix can be used to attach your Elfbar to an electric guitar, amp or any other electric instrument. In my case I use it on a key board like this one: Audio Jack Key Board von Tobi-zer | Kostenloses STL-Modell herunterladen |…
Einfacher und schicker Webcamhalter. Ich hatte keine Lust mehr den 100. Kamerahalter für meinen Neptune 4pro zu drucken und dann irgendwo an dem dranzubauen. Immer ist was nicht richtig oder im weg, oder ich will mal einen anderen Winkel…
3D printable topographic miniature of Belfast Capture the beauty of Belfast 's city landscape with this topographic miniature! This 3D model represents the geographic area around the geo coordinates 54.598, -5.928 (LatLng) . It is scaled…
Used to keep the vertical Elfa profiles from gliding sideways without drilling holes. To be glued with double-sided tape and fastened to profile with an M5x15 (or 5x20) countersunk screw.
The new Elfa top rail is not designed to prevent the hanger rail from accidentally being pushed up. (I'm guessing materials cost and manufacturing savings.) So instead, I designed a clip that will prevent the hanger from being nudged off.…
Elfangor's Ship from the Animorphs graphic novel series (drawn by the amazing Chris Grine). EDIT: I made a version without the landing gear, since most of the time when the ship is in space the landing gear would be absent (also, my…
Es ist ein nützlicher Helfer um eine Übersicht von seinen Gürteln zu haben. Die Bauteile lassen sich mit Klammern immer mehr erweitern. Ich habe die Teile noch etwas mit Kleber fixiert.
Der Halter besteht aus zwei Teilen und wird für die Montage von Wickelfalzrohren oder anderen Absaugrohren verwendet. Der Halter hat eine Nut, für die Einlage von Moosgummi. Durchmesser 125mm
This is a tool holder base to fit Elfa's old Utility Track. The track interface is similar to the one on the Friction Tool Holder (Elfa Style) by @ericsnis , but with locking pins that can slide in horizontally instead of flexible…
Printed in PLA, 0.6 nozzle, 15% infill and 3 perimeters. Split the body in prusa slicer with dovetail too fit the bed. Tested with 15kg load and holding strong.
Concepto de Diseño Esta "Figura de Elfa Yoga" encarna la tranquilidad y la paz, presentando a una elfa en una serena postura de yoga. El diseño enfatiza líneas armoniosas y rasgos elegantes, capturando una cautivadora sensación de calma y…
Printed in PETG. 0.4mm nozzle. 0.2mm layer height. I whipped up some hangers that fit perfectly on the .25" in front bar of the Elfa shelving I have in my office.
Its a small and easy (newbie) play with 3d printer. Works well and has a purpose. Holds a sponge on a Belfast sink (Hooks on breather/overflow thing)
Nice stable mount for a Wyze Cam v3 to the now-discontinued version of the Elfa Top Track (e.g., here ). Note that this model does not have the snap-fit features to make it click into place on the Top Track, it just stays in under gravity…
This is a 3D-printable shelf bracket designed to fit Elfa wall double rails . It’s available in two lengths — 150 mm and 240 mm (total length including hanging hooks)—and in two versions : With stopper – helps prevent items (e.g. skis,…
Ein einfacher, schnell druckbarer Einsatz für jeden Kugelfang mit 14x14cm Zielscheiben damit man auf Streichhölzer oder Zahnstocher schießen kann. Der Abstand zwischen den Streichhölzern / Zahnstochern beträgt 10mm, sollte Bedarf an mehr…
Ein einfacher, schnell druckbarer Einsatz für jeden Kugelfang mit 14x14cm Zielscheiben damit man alles was magnetisch ist (Co2 Kapseln leer, leere Hülsen, Schrauben und und und) als Ziel beschießen kann. Der Abstand zwischen den Magneten…
Thinner versions of the Elfa Pegboard mountable Gridfinity base plate based on jevans84's original 2x5. Created new 1x5 and 1x3 for less depth to work better with windowed boxes. Also provided the OpenSCAD file used to generate based on…
Two different designs for a replacement pin for elfa wire drawers. The round one is closer to the original pin, but the square one prints more reliably. Both work just as well as the original. I printed mine in PETG, but they should work…
Filament spool holder to easily hang on ELFA rails next to your printer, also fits on their wall board with same holes. Convenient way to hang filament spools if you have your printer on such a shelf system. Uses a piece of 4mm PTFE tube…
2 Schächte für Target Cards im Maß 85x55mm entweder selber gedruckt oder über ein Projekt von mir. https://3d-druck-typ.xo.je/target-cards
Made to fit a standard sorting box. I printed this in PETG with a 0.4 nozzle, 0.25 layer height, STRUCTURAL, 4 vertical perimeters. Print two for each box, and mirror one of them.
Eine Sammelbox für Kleinteile. Aufgrund der Schrägung in den Fächern lassen sich kleine Teile leicht entnehmen. Bei den herkömmlichen Boxen sind meist die Finger zu groß um die Kleinteile fassen zu können. Mit den abgeschrägten Fächern…
COMO ESTA ECHO POR IA TIENE DEFECTOS MANOS, PIES, OREJA, ETC (NO ES PERFECTO LA IA) TRATO DE QUE SALGA BIEN LA IA
COMO ESTA ECHO POR IA TIENE DEFECTOS MANOS, PIES, OREJA, ETC (NO ES PERFECTO LA IA) TRATO DE QUE SALGA BIEN LA IA
COMO ESTA ECHO POR IA TIENE DEFECTOS MANOS, PIES, OREJA, ETC (NO ES PERFECTO LA IA) TRATO DE QUE SALGA BIEN LA IA
COMO ESTA ECHO POR IA TIENE DEFECTOS MANOS, PIES, OREJA, ETC (NO ES PERFECTO LA IA) TRATO DE QUE SALGA BIEN LA IA
This a wall protector for an Elfa hang standard which you hang from a top track. A 25x25mm felt glider can be added for more protection. The protector is attached using just friction and stays in place when the hanger is pushed to the…
Staub-Deckel für Elfbar Elfa Master – 850mAh Pod-System
Ich habe für das Werkzeugfach meiner Vespa eine passgenaue Schublade konstruiert, mit der sich der vorhandene Platz deutlich besser nutzen lässt. Sie bietet eine einfache Möglichkeit, Schlüssel, Kleinteile oder anderes Zubehör ordentlich…
The model is made on OnShape so you can edit to fit your needs. OnShape Model Additionally you need: M10 screw 2nuts 2 washers Esp32-c3 from seedstudio 2 WS2812B 8x32 matrix Fishing wire 5v power supply
To add to my ongoing series of Elfa related accessories . I created this simple divider for the narrow Elfa bins. It allows for additional organizational options and for the contents to stand more upright. If you'd like to make them fit…
After making my successful Elfa hook ( https://www.thingiverse.com/thing:3367198 ), I wanted some shelf/bowl for smaller items (keys, wallet, etc.). Made this bowl to fit in a corner. Printable without extra support when put on its side.…
Having an ELFA storage system in the house is nice, but expensive to get new parts. Thought a simple hook would be good, but paying $1 or whatever seems overkill. Designed this hook to carry my backpack (or whatever) and fitting in the…
This is a grippy friction tool holder styled after the Elfa Utility organizer system . Simply push the tool into the rubber on the bracket and it will snap shut holding the tool. It can hold hammers and some yard tools like rakes. It can…
The narrow Elfa Utility box is kind of a staple in my implementation of the board. However, I wanted to be able to divide the space better to handle different items in groups. I'd originally designed this , which worked okay, but wasn't…
Print the clip Press the clip onto the Back Stop pins Personally, I printed these in PETG, but feel free to experiment with other materials. Enjoy and feel free to let me know how it goes or any potential suggestions!
Elfa Shelf Hooks, six different variants. Double hook, thin, wide and two versions of a hat hook. I know that they are not solid/water tight, but for me with Cura they print fine. Print Settings Rafts: Doesn't Matter Supports: Yes…
This silly wire shelf is perfect except one thing - the shelves keep falling out and don't glide gracefully. Inserting these items helps - snap the pipped ones in the front and put the pipless ones in between (may need to use tape or…
This is a marker and eraser holder with an optional attachment to an Elfa pegboard. It holds 16 markers and an eraser. It took me about 2.5 days to print in PETG with 0.10 mm layer height. I printed it with the “Whiteboard Markers”…
Our pantry is becoming extremely cluttered on the floor which includes box of Costco K-cups so I wanted to hang them under the Elfa shelving system. Print two instances to fit in each section of the shelf front to back allowing for six…
A print to hold a label on an Elfa or similar thickness shelf to help with organization. For shelves ~0.75 in or ~19 mm thick. The model prints in two pieces (the clip and the label holder). Can either snap together and leave as is or add…
This is similar to the original version, but with a much thicker mounting clip in order to avoid breakage.
DE: Hier ein Kugelfangkasten aus drei Teilen. Natürlich NUR für Co2 und Luftdruckwaffen! Problemlos bei ~7,5 Joule! Kugelfangkasten aus Nylon (PA12CF15] Einlage aus 3mm TPU, als dämm und Durchschlagbremse. Äußerer Haltering aus TPU. Für…
Fahrgestell für Playmobil Odelfass 1977. Es fehlen Teile wie z.b. der Werkzeugkasten! Falls ihr den Rahmen daher noch ändert wollt habe ich euch die Fusion 360 Datei in den Anhang gelegt. Viel Spaß damit
I made this holder as the Belfast Sink I got with my new kitchen from Wren Kitchens supplied a plug but nowhere to store it. Hopefully can be useful to others
Broach Files Holder for Elfa pegboard Required one pair of module clips https://www.prusaprinters.org/prints/60471
Halterung für vertikale Steckdosen mit Kabelfach zur Aufbewahrung von Kabel. Das Kabel wird durch den Loch hinten durchgesteckt und von unten mit kreisförmigen schleifen reingesteckt. Am Schluss wird der Stecker in das Netzteil gesteckt…
A "Elfa" mount for Ryobi Charger, created just to have a clean desk.
Very simple spool holder. No joints or assembly required. Just a minimal amount of support. Not really tested for extreme weights, but seem to strong enough for at least one kg spools. I've only printed it with 15% infill too. Made with…
Who's got two thumbs and an Elfa Utility Board? I guess that's me. I really like the board, it's cool to have the peg board option and the ability to use magnets. However, since Elfa didn't ask me what I thought would be necessary in…
