Tictac Y Axis voron 0.2 display mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Tictac Y axis feet replacement
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 32
- Makes
- 0
- Views
- 422
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This modification is easy to do.
1x voron V0 display
1x micro usb cable long enough to get from the pi zero2 or other pi to the screen (not sure at the pi that it will fit).
Pi zero 2 fits because ive used that one.
1x 4 pin jst XH connector M and F (Or Dupont on what you like)
Several bolts M3. not sure what size.
4x 2x10 self tapping screws
--------------------------------------------------------------------
mounting plates that ive used:
https://www.printables.com/model/174265-mini-display-mount-v-minion
--------------------------------------------------------------------
This is display is a perfect fit for the V0.
Installation is very simple, instructions can be found here:
https://github.com/VoronDesign/Voron-Hardware/tree/master/V0_Display
--------------------------------------------------------------------
Display
https://biqu.equipment/products/voron-display-v1-0