Counting matching models…
This is a version of the well known “TicTacToe” game. This game is easily transportable and can be played in a car, train or plane while traveling. The lid has been designed in such way that it is easily taken off to use as a tray to hold…
This is a simple one-handed operation TicTac dispenser, for use when driving or wherever. The discharge chute can be flipped to make it left or right handed. Note: Now V2 . The dispenser is no bigger externally, but the slider cavity has…
This is a variant of the well known “TicTacToe” game. To make it more interesting now you have to play in 3 dimensions. Beware, it is not easy to recognise a row in all 3 dimensions! In this game each player has 3x3 pieces. (The 3mf and…
This game gives each player 6 caps in different sizes. Large (Top or Bottom) Medium, Small, Mini, Micro and Nano. 12 Pieces can be stored in a Container with a thread to make it easier to travel. If you have a small pen 45mm long, you can…
Welcome to project TicTac a 120mm3 3D printer V2.0 with upgraded Z Drive assembly and RatRig ToolHead V1.0 Beta Hotend. The new Z drive design features relocated pulleys and a shorter Z_Cap for improved stability. Assembly is similar to…
+-+-+-+-+ Check out Version 2.0 !!! Modified, so the turn-pieces won't turn by themselves. https://www.printables.com/de/model/745979-v20-travel-xo-travel-tictactoe ---------------------------------------------------------------- Since my…
Form plate is supposed to be glued to the base plate. Print 5x cross and 5x the circle.
In order to have the bolts sit flush with the surface of the tictac gun, I added a negative volume for each. To do this yourself, right-click the gun part, add negative volume, select Load, and pick the m3-hexnut.step file. Center it…
The "Classic Game, Print-and-Play" Tic-Tac-Toe Set 🎯 Sometimes you just want the simple game, ready to go, without digging through a drawer for a pen and paper. I wanted a durable set that packs up small and plays anywhere. So I designed…
V2.0 now the turn pieces will not turn by themself. I designed a little locking pin, which prints support-free. the blank side is wobbling a bit more (more clearance is needed so it won't stick together while printing). X and O sides are…
This is a set of molds to play Tic Tac Toe with sand. Includes 5 degrees of draft to make removal easier. The sand set is all you need for molds, but you can print the complete set in order to play without sand as well.
Magnetic TicTacToe board and game pieces. In the File section you will find models that support 5x3mm, 6x3mm, 8x3mm, and 10x3mm magnets. Additionally, for each of these sizes, there are 2 types of models: “glue-in magnets” and “embedded…
Floating TicTacToe The perfect game to play in your pool. This game is oversized and can float which makes it ideal for use in the pool. Update: New Mini Size And Jumbo On-The-Go Print Files For Smaller Printers Mini version has just been…
This is a variant of the well known “TicTacToe” game. You can also find it under the name Gobblet, but then you have a 4 X 4 field. The 3 X 3 field is called Gobblet junior In this game each player has 3x3 pieces. The bigger piece can be…
Fun 3D printable board game: Tic Tac Toe 3D. There's three sizes of pawns that can be placed over each other. This gives TicTacToe a fun extra set of dimensions. Rules that you could use: Person who lost the last game can start The pawns…
It is possible to modify using the original Lerdge iX frame, but some additional parts will be required to complete the assembly. Major components may include the X-axis attachment plate and the heated bed base plate.
Just a quick parametric model of Naughts and crosses for printing
Disclaimer: This model use @Xuis delightful Skådis T-Clip System , go check his page! What is this? This is a little TicTacToe to get distracted by instead of finishing this project you started 3 months ago. Assembly instruction…
Es lässt sich wie das normale spielen nur das man bei diesem mehrere gewinn Möglichkeiten hat. Solang die Zylinder kleiner sind als der nächst Große kann man sie einfach übereinander stecken und so denn platz wieder für sich beanspruchen.…
2 color Tic Tac Toe designed for LM Show Christmas Print Drive At Layer 2.20 make a color change swap to allow for a different color for game. 0.2 layer height, 4 top, bottom, walls with 15% infill Turn on Ironing all top surfaces No…
Project Homepage: https://lerndinge.at/wp/logobox/ Deutsch: https://www.youtube.com/watch?v=a2xXxlJcjbU Deutsch: Die Logobox wurde für den Einsatz in der Primarstufe entwickelt. Angepasst an den kognitiven Entwicklungsstand sollen mit…
Printed with our PLA: PLA Vanille PLA Lavendel PLA Grasgrün
A portable version of the classic TicTacToe game with a satisfying snap due to the power of magnets. Ideal for when traveling with kids. Versions for use with 4x2 or 6x3 magnets Optional mount to place it on an angle on a desk. Optional…
3D tic tac toe game with travel box. Best printed with: - layer height: 0.14 - speed 50 mm/s - support (tree, starting from 50%) provided files are: small, med & large markers (print 2 each for both players) playing field (print 4 times)…
Portable version for traveling: 3D printed game set takes the timeless tic-tac-toe and supercharges it with an array of exciting features. The game board boasts a stunning, intricate design, while the X and O pieces are transformed into…
Game suitable for 6 players but can be adopted to more players. This game is a cross over between Jenga and TicTacToe or Pattern game. Jenga X TicTacToe This game is suitable for 2 players. You select one of the respective shapes and keep…
A basic 3D TicTacToe Game. Larger Figures can be placed over smaller ones to take over a specific Field.
This TicTacToe is an extended version of the normal variant. How to play: The game starts with the cross in any place. Each player has 4 figures. Now each player can take turns performing an action: 1. place a pawn on a square of choice…
TicTacToe Genius, with more fun. You have to Scale the Figures in the Slicer. 100% 78% 58% (Big/Medium/Small Figures) I printed 3x large, 3x medium and 3x small Figures for each color. For the Figure-Stand i use 8x NeodymMagnets with 10mm…
cover for the TicTacToe board you can find at https://www.printables.com/model/564388
First sketches were made already in 2023, at the end of 2024 I forced myself to create the first trial version, which surprisingly came out :). Print in place! Dimensions of the folded game 85x80x12mm. 9 pawns can be inside when closed.…
Game stamp to play games in paper easily stamp a tictactoe or the timbiriche dots on the other side Ideal for PLA or other filaments measurements 14cm x 8cm x .9 cm
Playable TicTacToe Picture Frame. It used 5x3mm magnets with print in place. Printable without support. Frame: 18x magnets X and O: 18x magnets For best practice, use 2x nails. The different between the nails must be 110mm. I also added…
Das Modell wurde von mir selbst erstellt und Modelliert. Das TicTacToe Set besteht aus: 1x TicTacToe Feld TicTacToe Kreuz TicTacToe Kreis Das Feld besteht aus 9 Feldern Normalerweise Spielt man das Spiel auf Stift und Papier, durch das…
this is the halloween version of a model I will soon publish. Do not SCALE under 80% size* Print settings: 0.2 or finer layer* NO supports* I also used: brim 15% infill *print will not work without please leave a comment if you want a…
Famoso gioco del Tris (TicaTacToe, Filetto) in versione pig\maialino Per la base a due colori, ho messo semplicemente una pausa e cambiato il colore manialmente
Portable version for traveling: 3D printed game set takes the timeless tic-tac-toe and supercharges it with an array of exciting features. The game board boasts a stunning, intricate design, while the X and O pieces are transformed into…
This is a version of the well known “TicTacToe” game. This game is easily transportable and can be played in a car, train or plane while traveling. The lid has been designed in such way that it is easily taken off to use as a tray to hold…
I keep different little parts in tic tac bottles. This keeps eighteen bottles at a handy slant for easy access.
A staggered holder for the TicTac style boxes. It was designed to make it easy to see and grab a box while working. Fits 25 individual boxes. Print settings: 0.4mm nozzle 0.2mm layer height no supports. 5-15% infill PLA print face down…
Here you have a travel game, the Crazy 3D Tic Tac Toe. It is made for easy printing and you need no additional parts for it. Just print everything like it is saved in the file and have fun. Print the figures two times in different colors.…
TicTac is a very cool candy, but you literally can't bring it anywhere because of its noise.. This model fixes that! Print from TPU - 95A should be fine, one wall and not a lot of infill. Support material is needed.
Kids love to make noise, squash things, and cook with dirt. Their “potions” are made of twigs, leaves, pebbles, and a thousand other things that have nothing to do with real cooking. This toy is a mortar and pestle that you fill with dry…
This print turns a TicTac container into an ant trap with a sheltered entrance to keep your bait powder dry. I had a problem with ants in my storage room, but I also have cats and kids. I wanted to use a sugar/borax poison mix to get rid…
This is a remix of a lid for https://www.printables.com/cs/model/72243-tic-tac-cap-a-game-of-stacking-and-stealing . I did not want to bother with steep overhangs of the original model, so I did this remix. Used a modifier box to set…
For Sale here: https://atlaslabs3d.com/ "Elite" version of this model with many fixes, upgrades and features is available here: https://cults3d.com/en/3d-model/game/ttg2-a-better-box-connection Loading mechanism was redesigned for more…
Tictac Box only to demonstrate the function in the pictures!!! A small formicarium for transport with a cap and Tictac Box water station. This small formicarium can be placed in an outworld or terrarium and serves as a nest and watering…
This modification is easy to do. 1x voron V0 display 1x micro usb cable long enough to get from the pi zero2 or other pi to the screen (not sure at the pi that it will fit). Pi zero 2 fits because ive used that one. 1x 4 pin jst XH…
Hello guys!! Im happy to introduce you Tic Tac 2, the model can be printed in place, just set tha face that will lay down on the table when you are playing (sorry but axes were mixed when designing), hit print and enjoy it! YOU WILL NEED:…
Gniazdo z mini areną zamknięte w pudełku po dużych tictacach. Gniazdo z nawadnianiem automatycznym - wystarczy ok. 10 ml gipsu budowlanego, który zapewni stałą wilgotność w gnieździe. Wodę do nawadniania dostarczamy za pomocą probówki o…
A textured remix of the Ant Nest TicTac box by TheCraftingAnt ( https://www.thingiverse.com/thing:6543513 ) Added my cover for the nest to the files ( https://www.thingiverse.com/thing:6560208 ) Tube_feeder by TheCraftingAnt Print…
A quick cover for the Ant Nest TicTac box by TheCraftingAnt ( https://www.thingiverse.com/thing:6543513 ) Make sure you flip it in your slicer so the flat top of the cover is on the build plate. Print Settings Printer Brand: ELEGOO…
I use the empty TicTac boxes for small parts storage so I made the “Rac” to hold them.
