1 / 2
Mounting bracket for the Simmagic P-HPR on PT-2 Pedals — image 1
1 / 2

Mounting bracket for the Simmagic P-HPR on PT-2 Pedals

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A mounting adapter to allow you to install the Sim Magic P-HPR haptic reactors onto the Protosimtech PT-2 pedals.

Rating
0 / 5
Likes
2
Downloads
37
Makes
0
Views
521
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

These mounting adapters hook over the top stretcher/spacer on the pedals and are secured with screws into the side through the pedal arm slot. They won't work if you have the pedal arm up high in the slot. They also won't work on the clutch pedal, but work great on the throttle / break.

Print with 20% infill, and at least 3 perimeters. You will need supports under the cylindrical section.

The model is designed to be used with 4mm heat inserts that have a 6mm outer diameter. You'll need 4 of these per adapter.

To assemble, screw the flat black plate that comes with the HPR's onto the adapter, then mount the HRP onto the plate. Once assembled you can install onto the pedal by hooking it over the top spacer and rotating until the side holes line up with the pedal arm slot.

Tags