1 / 1
Motherboard Mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Motherboard test-bench / tray to keep motherboard suspended.
- Rating
- 0 / 5
- Likes
- 28
- Downloads
- 181
- Makes
- 0
- Views
- 3,011
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution
test bench/motherboard tray to put in heat-set inserts then motherboard standoffs to mount itx/matx/atx motherboard on. Bottom ⅓ fits in the top ⅔ and arrows point at each other so you know the correct orientation
Size:
- top: 237mm x 185mm x 10mm
- bottom: 237mm x 115 x 10mm
Instructions:
- don't pull it off the bed immediately
- have 13 heat set inserts and motherboard standoffs ready
- use soldering iron to press the HSI's directly into the 2 pieces
- be happy you have the thing and rate me if you like it
disclaimers:
- All measurements in picture are in millimeters
- The picture is not the drawing of the tray itself, it is just measurements of the holes and distance between them for atx-itx motherboards