VETERAN SHERMAN BUMPER STAND
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Easy to print bumper and stand for the Veteran Sherman
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 23
- Makes
- 0
- Views
- 271
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Sports
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Visit my Cults3D page for more designs
The bumper will click in place right over the arch of the front shell. Add velcro or double-sided tape as seen in the pictures to ensure a secure connection.
For the one piece design :
- I recommend printing it in TPU with at leats 5 wall and a high infill percentage.
- Printing it in PETG might also work but I haven't tried it
For the three pieces design :
- Print the main part in PETG and two TPU nubs with the recommended settings below.
For TPU :
- 4 bottoms
- 5 tops
- 4 perimeters
- 10% infill - Triangle
- Print with the hole facing up
For PETG :
- 3 bottoms
- 6 tops
- 4 perimeters
- 15% infill - Cubid
- Supports : Yes