Kobalt hex key set for Honeycomb Storage Wall (HSW)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Designed for a Kobalt hex key set (may fit similar brands). CAD model available.
- Rating
- 0 / 5
- Likes
- 22
- Downloads
- 80
- Makes
- 0
- Views
- 523
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This model snugly holds a single Kobalt hex set on a honeycomb storage wall (HSW). Instead of using the classic screw or hex-based insert, this model uses a clip on design from KXY Design. (If you haven't already, check out their EZ clips!)
This works with a Kobalt hex set that contains a star, metric, and imperial (SAE) keys. Note that the diameter of the largest metric size means that the metric key set can only be inserted in a single direction. The other 2 can be inserted either way down.
Note that the model in the picture uses 3 hooks (v3), which I've since determined is an overkill so the model I've uploaded includes just 2 on the ends. I found the fit was just too tight with 3, but haven't re-printed since I only have one set of these ;-)
Because I'm using the KXY hooks, I strongly suggest printing the hooks for maximum strength. which means printing this model on it's side. (Slicer example shown below.). Unfortunately, this means enabling supports. Boo! I know, I know. I hate them too. PrusaSlicer's organic supports make this a bit less painful…
I printed mine in some super cheap PETG with a 0.6mm nozzle, but do whatever works for you.
Apologies to anyone who opens the CAD files; not my best work, but hopefully it helps someone out if you just need to make some small changes.