Dishwasher clean/dirty indicator
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
No clean/dirty indicators were what I wanted, so modeled my own. Magnetized, large letters and low-friction slider.
- Rating
- 4.609 / 5
- Likes
- 878
- Downloads
- 2,439
- Makes
- 23
- Views
- 13,311
- Reviews
- 23
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution
I wasn't satisfied with any of the models I found for clean/dirty dishwasher indicators, so I decided to practice some modeling and make my own. My wife hates the feel and sound of 3d print material sliding together, so I used a low-friction slider to reveal the correct state.
Slider snaps over the top of body after printing. Magnet holes fit for 15 x 3mm, I glued the magnets in slightly proud for best adhesion.
This is the first published version, follows alpha v1 that had .01 tighter tolerances, only 2 magnets, and deeper/smaller letter holes.p