CLEARVIEW Ender 3 v2 C270 webcam mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mount and case (Courtesy of andlod over on thingiverse) for Logitech C270 webcam, fits right on the X axis motor.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 19
- Makes
- 0
- Views
- 247
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
After searching the web tirelessly for just the right ender 3 webcam mount, I said screw it and decided to just make my own. It sticks far enough out that you can see the WHOLE bed which apparently not a lot of people value looking at most mounts out there! Mounts right on your x axis motor (You will need 4 M2.5x45 screws as the stock screws are not long enough). You will also need 1 M2.5X35 and 1 M2.5X30 (If you don't want it to stick out to far) bolts And 2 M2.5 Nuts for the camera mount part.
For Camera assembly instructions check out the original thingiverse file (you will need additional hardware): https://www.thingiverse.com/thing:4336930
Should be able to print on any ender 3 with no supports (possibly a brim or mouse ears though) with relatively high infill (50%+) to prevent vibrations from the printer out of a solid material (ABS, PETG, PLA)