CLEARVIEW Ender 3 v2 C270 webcam mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount and case (Courtesy of andlod over on thingiverse) for Logitech C270 webcam, fits right on the X axis motor.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 247
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
After searching the web tirelessly for just the right ender 3 webcam mount, I said screw it and decided to just make my own. It sticks far enough out that you can see the WHOLE bed which apparently not a lot of people value looking at most mounts out there! Mounts right on your x axis motor (You will need 4 M2.5x45 screws as the stock screws are not long enough). You will also need 1 M2.5X35 and 1 M2.5X30 (If you don't want it to stick out to far) bolts And 2 M2.5 Nuts for the camera mount part.
For Camera assembly instructions check out the original thingiverse file (you will need additional hardware): https://www.thingiverse.com/thing:4336930
Should be able to print on any ender 3 with no supports (possibly a brim or mouse ears though) with relatively high infill (50%+) to prevent vibrations from the printer out of a solid material (ABS, PETG, PLA)