Arc Enclosure Acrylic Front Door Gap Bezel
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Another noise and dust preventative measure for the ARC enclosure front acrylic panel
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 18
- Makes
- 0
- Views
- 209
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bambu Lab Parts & Upgrades
- License
- Creative Commons — Attribution
I created this trim piece for the top of my front door panel for my ARC enclosure of my P1P. I noticed that there was quite a large gap and wanted to make sure this was not a source of noise leakage and dust ingress. I also added a strip of foam at the top to make sure that any issues with tolerances in my design would be made up by the foam.
I bought the acrylic panels from the following Etsy seller
Printed using Flashforge Burnt Titanium PLA. No supports needed
Please let me know if you have any questions or comments. Thanks for checking out!