Polybox silica container version 2
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I redesigned the container because i wasn't happy about how i did the first and i wasn't very pleased how others did it.
- Rating
- 0 / 5
- Likes
- 18
- Downloads
- 132
- Makes
- 0
- Views
- 534
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Public Domain
This container works with all spools that fit inside the polybox and with populair couplings.
It snaps firmly shut to minimize the risk of spilling.
I printed them out of PC so i can put the into the oven and dry the silica gel without taking it out, so i don't have to handle loose desiccant.
When drying with the container in the oven i don't recommend going over 110 degrees C.
You can modify the infill pattern to the density and pattern you prefer, 25% infill with 0.45mm extrusion width for the infill, 0.6mm nozzle and a grid or honeycomb infill pattern worked well for me.
You need 2 M3x12 or longer socket head screws that screw in from each side into the plastic.
Don't forget to post a make and give this model a rating, I love seeing those!