1 / 5
Carvera Makera Tool Caddy Mk3
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A tool caddy for the carvera cnc machine that holds most of the commonly used tools and clamping hardware.
- Rating
- 5 / 5
- Likes
- 36
- Downloads
- 288
- Makes
- 3
- Views
- 1,802
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution
I printed mine with the main face (with the text on it) on the build plate at 0.4mm layer height in hatchbox pla, organic supports with auto detection, and 7% gyroid infill. I had to pick out supports from the holes, but it gives a much nicer display surface/makes sure all those holes are nice and round.
It holds the following:
- 9 short screws
- 6 medium screws
- 6 long screws
- 2 stacks of washers in different sizes
- all 4 of the carvera collets and probe adapters
- 4 - 4mm alignment pins
- 6 - 2mm two sided milling alignment pins
- 6 - 6.5mm shoulder bolts (these are specific to my machine. I made an aluminum bed that allows me to turn any of the screw holes into alignment pins)
- 8 flat hold down clamps
- 2 toe clamps
- 2 stepped riser blocks
- 2 additional riser blocks for the stepped riser blocks
- 2 hex drivers, the included 3 mm and a shop made 4mm
- the 2 stock 4th axis chuck wrenches