1 / 2
Higher middle foot bracket (+40mm) for Original Prusa Enclosure
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Higher middle foot bracket that can allow you to put PSU under the Enclosure.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 12
- Makes
- 0
- Views
- 168
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Modified version of middle foot in addition to my other model of feet brackets, that can allow PSU to be under the Prusa Enclosure.
To mount it on the Enclosure you need to use some doublesided tape.
Due to license conflict, I was not able to make it like one topic and just add this middle foot to my previous topic.
Higher feet brackets: https://www.printables.com/cs/model/657900-higher-feet-bracket-40mm-for-original-prusa-enclos
Printed with PLA Black 0.2mm STRUCTURAL with 0.4mm Nozzle