1 / 2
Nozzle to clean e.g. the drain pipe of a shower — image 1
1 / 2

Nozzle to clean e.g. the drain pipe of a shower

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

To clean the drain pipe of a shower, I have designed this nozzle with one inlet and 3 outlets.

Rating
0 / 5
Likes
2
Downloads
20
Makes
0
Views
306
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

Part is printed with PETG and is designed for an interface M8. I am using a polyurethan tube ⌀10 x ⌀6,5 where I add a thread M8 for the nozzle. I recommend to cut the thread step by step to avoid screw tap get stucked.

Print instruction:
  • supports: organic support recommended to ensure good adheasion to print bed
  • layer height: 0,2mm or 0,3mm
  • nozzle diameter: 0,4mm or 0,6mm
  • brim: NO
  • enclosure: NO
 
Note:

The picture show a vase with a diameter of about 150mm to show water jet of the nozzle.

 

 

Tags