IKEA TJUSIG Riser
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Risers for the IKEA TJUSIG to create more space for shoes under the first shelf.
- Rating
- 5 / 5
- Likes
- 12
- Downloads
- 84
- Makes
- 1
- Views
- 387
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
I wanted more space under the first shelf of the IKEA TJUSIG Shoe Rack, so I designed some simple risers to raise the entire rack by 4 cm. However, in creating these I discovered that all the legs of my TJUSIG Shoe Rack were different sizes, ranging between 34.4 mm and 35.6 mm. The version uploaded here is sized for a maximum leg size of 35.6 mm x 35.6 mm, but can easily be adjusted in the X and Y directions for slightly different sizes. I highly recommend measuring the legs of your TJUSIG Shoe Rack before printing!
For those that use Onshape, here is a link to the part studio.
Printed in Overture PLA at 0.2mm layer height, using support cubic infil, with 2 walls.