IKEA TJUSIG Riser
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Risers for the IKEA TJUSIG to create more space for shoes under the first shelf.
- Ocena
- 5 / 5
- Polubienia
- 12
- Pobrania
- 84
- Wydruki
- 1
- Wyświetlenia
- 387
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
I wanted more space under the first shelf of the IKEA TJUSIG Shoe Rack, so I designed some simple risers to raise the entire rack by 4 cm. However, in creating these I discovered that all the legs of my TJUSIG Shoe Rack were different sizes, ranging between 34.4 mm and 35.6 mm. The version uploaded here is sized for a maximum leg size of 35.6 mm x 35.6 mm, but can easily be adjusted in the X and Y directions for slightly different sizes. I highly recommend measuring the legs of your TJUSIG Shoe Rack before printing!
For those that use Onshape, here is a link to the part studio.
Printed in Overture PLA at 0.2mm layer height, using support cubic infil, with 2 walls.