Vinyl Fence Rail Tie
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Used to hold vinyl rails in place after installation of fence (for 5" fence posts)
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 52
- Makes
- 0
- Views
- 226
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
(For 5” Vinyl Fence Post) Attach the rail tie inside the post after the rail has been installed to add strength and durability to the post and rail system. This will help prevent the rails from backing out in high winds. I attached with #12 2-inch self-tapping screws. The design incorporates a trough for custom screw placement and a thin layer for the screw to punch through before driving into the rails.
Print these in lieu of buying plates for each post. I used PETG.
The first file (Plus '+' shaped one) is for corner or t-posts but can be used for in-line posts as well. The second file (flat '-’ shaped one) is for in-line posts.
Print as oriented and install upside down. No supports needed as there are clean bridges.