Pattern Offset Guide
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.35 – €0.42 net (excluding VAT)
For file: Core_0.4n_0.2mm_PLA_MK4IS_31m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.39 excluding VAT (range midpoint).
- Weight reported by the author
- 2 g
- Print time reported by the author
- 31.2 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Guides for marking pattern offsets using FastCap Long Nose Pattern Marker
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 23
- Makes
- 0
- Views
- 350
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
This is a set of offset guides that can be used with the, "FastCap Long Nose Marker". The “core part” will give a ¼" offset. There is a ½" and 2" guide that the core part will slide into. You can see what I mean in the section photo. You can make other guides by modelling a cylinder with a radius of the offset you want and an 11.5mm hole. It is extruded to 45mm high. If you want the line thickness fully within your offset then subtract 0.6mm from the radius.
Before sliding the core part onto the marker, wipe away any ink residue using isopropyl on a paper towel. Be gentle sliding it on and off of the marker. If you find it a bit too tight just scale the core a bit larger, then allow for the larger size hole in the guide. I have included the Fusion 360 file if you want to modify the model for your needs.
I purchased my marker from Lee Valley, but it looks like they are available on Amazon also.
This has been useful for adding seam allowance to sewing projects. The 2" one is what I use to provide both the seam allowance and the ease when making patterns for RC airplane bags. The core on it's own is a good size for seam allowance for RC prop covers.