Poop Chute for Bambu Lab X1 and P1 series
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Poop Chute for Bambu Lab X1 and P1 series. No supports.
- Rating
- 4 / 5
- Likes
- 12
- Downloads
- 202
- Makes
- 1
- Views
- 1,183
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Bambu Lab Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Poop Chute for Bambu Lab X1 and P1 series. No supports.
With chute (Part1) you can use any other Part2 (bim/box/bucket) not higher than 60mm (printers with standard/factory rubber “legs”). You can also aim straight for the plastic bag.
It is screwed version of chute where spare screws are used to assembly (2x silver screws M3x8. I found appropriate screws in spare parts box from Bambu when buying printer).
Using 2x screws - it makes assembled chute more stable than other already designed solutions with one hole for screw. Also designs with magnets and/either double sided tape are not for me.
During printing recommended are:
- Brim, because of warping
- Positioning of chute according “.3mf” file
Using small hex key (size 2mm) screwing of the bottom screw is possible (and not difficult) - I didn't want an extra hole (for hex key) on the opposite wall of the chute.
When tightening the screws, be careful not to overtighten the thread (the thread on the printer is plastic).
If you like / download please don't hesitate to push "like" button - appreciate it