Expandable Steel Sheet Holder (Bambu Lab X1/P1/A1)

This is the Bambu Lab X1/P1/A1 version (256mm print bed) of my steel sheet holder for Prusa MK & MINI.

"Slightly" overengineered flexible steel sheet holder for Bambu Lab X1/P1/A1 printers to be screwed to a shelf.

It's also extendable to as many as you want.

Variants for other steel sheets:

• Prusa MK & MINI
• Prusa XL

Support my work

For non-Prusa parts and filaments, check out 3DJake (International, UK, Germany, France).
I'll get a small cut of any order you fulfil using these links (at no additional cost for you 😉).

If you want to support my work directly, you can buy me a coffee.

If you want to order a Prusa printer and earn some Prusameters (I will also get some), you can use my referral code "@Whity" at checkout or click one of the following links
(the code only works for the first order of each printer model):
| CORE One | CORE One Kit | MK4 | MK4 Kit | MINI+ | MINI+ Kit | XL | SL1S | SL1S+CW1S |

Also check out my other models.

Description

After printing and assembling all the parts, add M3 nuts to half of the holes (see pictures). These are used to attach additional sheet holders later.

Then use 3mm wood screws or M3 screws to screw the two sides to the shelf (using the other half of the holes). Use a steel sheet for the correct spacing. This can be a bit fiddly. An option would be to glue together the top and bottom half with a few drops of glue to prevent then to move around too much.

To add an additional holder, just use 20mm M3 screws to attach them to the first one. That's why we inserted the M3 nuts before. Don't forget to add M3 nuts if you plan to add some more holders. You can also add two holders at once using a 40mm M3 screws.

Print instructions

Print with 0.2mm layer hight. No supports needed.