Magnetic Tolerance Gauge
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Multi-directional tolerance gauge printed on a Bambu Lab X1 Carbon. Used to test print tolerances
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 29
- Makes
- 0
- Views
- 435
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bambu Lab Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
A tolerance gauge that helps check tolerances from 0.15mm to 0.50mm. It has the ability to check internal and external diameters as well as vertical hang and 20 degrees of rotation.
If used with 10mm magnets in the levers and base you can test the tolerance of the magnetic field on the product.
Each levers internal diameter is 8mm plus the tolerance. The peg in the 0.50 slot is 8mm to test the internal diameters tolerance. The top of the lever accepts a 10mm magnet. The base also accepts (5) 10mm magnets for mounting and to test the magnetic field tolerance.
You can purchase 10mm magnets here *Affiliate link