RFID NFC N-tag case (magnetic)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This magnetic case is supposed to hold a standard 30 mm coin tag (ISO 15693). It works of course with any smaller tags.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 79
- Makes
- 0
- Views
- 783
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The magnetic case is supposed to hold a standard 30 mm coin tag (ISO 15693). It was designed to be used with a ESPuino :: Rfid-controlled musicplayer.
There is a hole in the case and also in the base for a standard 8x3 mm round magnet. Depending on your printer tolerances you can press fit or glue the magnet into the base.
The case has a press fit lid, it can be opened later thanks to the small cut out.
The case top has a duplo compatible version, so you can fit duplo figures etc. on it.
Tips:
- You can scale +-1% the parts in the slicer if you have problems with the press fit mechanism.
- The magnets are optional. The RFID reader works fine with or without the magnets.
- It should be fine without supports.