1 / 18
Super Mario Kart Deluxe Kids Ride On 24V - Front and Rear Wheels — image 1
1 / 18

Super Mario Kart Deluxe Kids Ride On 24V - Front and Rear Wheels

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This Download includes the STL Files for both the Front and Rear Wheels. A 3D Printer bed with 255x255mm is required.

Rating
5 / 5
Likes
47
Downloads
474
Makes
5
Views
7,781
Reviews
1

Updated at source:

Model information

Category
Vehicles
License
Standard Digital File License

Update 03/24:
While the original Version still holds up extremely well, I wanted to increase stability for the Front Wheels because there is quite some load on the original Wheel center rings. Those rings that come with the Kart are made out of Plastic and they are used to mount the Wheels directly to the shaft.

I therefore created an additional center axis and inner rim to hold four 6201-2RS (12x32x10mm) ball bearings per Tire. Pictures of how they look are included too.

After a bit of work on the mounting Rods (see important note below), the Tires now run on bearings.

Important: 
The mounting rods used on the Kart are ½in in diameter (12.7mm) and I used a small Dremel and make them fit. The process is not difficult and it took me 10 mins to make the bearings fit. However, it requires to do some sanding and that’s why I added the designed in addition am marked them optional.
Two of them need to be pressed into each side of the center axis

For the upgrade build, you need:
- Printed Parts (
- 8x 6201-2RS (12x32x10mm) ball bearings (4 per wheel).

Update 02/24:
We have the printed version on our Kart for about two months now and they are holding up great. The tire profile out of TPU is perfect, and beside the fact that they got dirty, they have no signs of wear or tear. The rims out of PLA+ got some scuff marks from sliding into corner stones but beside scratches, they hold up perfectly well.
 

Description:

Those are the design files (STL files) to 3d print both the front and rear wheels (and tires) for the 24V Mario Kart Ride-On Toy. I designed the wheels to be printed in several pieces and to be bolted together during the final assembly.

The outside rims have been designed to hold the Original Mario Kart Hubcaps. Just remove the four screws to take them off the original wheels and use the same screws to mount them to the new ones.

Besides all the printed components, the following screws and nuts are required (per wheel).

Front Wheel: 
- 14x M6x35 Button Head Socket Cap Screws 
- 14x M6 Nylon Lock Nuts

Rear Wheel:
- 9x M6x35 Button Head Socket Cap Screws 
- 8x M6x55 Button Head Socket Cap Screws (to mount the outside parts to the center rim)
- 17x M6 Nylon Lock Nuts

Print Instructions:

Important: 
You need to have a printer with a print bed of at least 256x256x130 to print the rear wheels. The tires won't fit on a smaller bed.

Inner and outer Rim:
- Print with at least 6 perimeters and 20% infill
- Use support because of the overhang

Center Rim and Center Axis:
- Print with at least 6 perimeters and 20% infill
- Use tree supports to ensure the nuts will later fit into the cut outs. 

Tires:
- Print with at least 6-8 perimeters and 10% infill. 
- For the rear wheels it is suggested to have more perimeters to increase the tires lifetime.

Tags