Bosch Quick-Connect Vacuum Hose Adapters
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Dust port adapters for quick-connect system found on Bosch dust collection systems.
- Rating
- 5 / 5
- Likes
- 48
- Downloads
- 229
- Makes
- 2
- Views
- 2,059
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This adapter is compatible with the quick-connect system found on Bosch dust collection systems.
I have two types of adapters one designed to slide into a dust port and one designed to slide over a dust port. For smaller dust ports to maximize throughput I use an adapter that fits over the dust port, for larger dust ports I use an adapter that fits on the inside.
Don't Have a 3D Printer?
We have them available for purchase at krayft.com.
Sizing/Fit
For the ID (Inner Diameter) adapters, measure the inner diameter of your dust port and purchase the ID adapter with an ID within 1mm of your measured ID.
For the OD (Outer Diameter) adapters, measure the outer diameter of your dust port and purchase the OD adapter with an OD within 1mm of your measured OD.
Threaded Adapters: measure the ID of your threaded flexible hose. LH = left-hand threads. Available in straight and right angle (RA).
Verified Compatability
I will update as more tools are tested and verified.
OD ~58 mm (~2.3 in) - works with most 2.5in dust port
Dewalt Table Saws
Bosch Router Tables
Bosch Table Saws
ID ~36 mm (~1.42 in)
Ryobi sanders
1.25in ID LF Threads - works with most 1.25in ID left-hand thread vacuum hose. There's a straight and right-angle version
If you need an adapter size that is not available, message me with the inner and outer diameter of the dust port you need an adapter for.
Printing Instructions
Print with PETG, PLA, other materials should work as well. I use PETG.