1 / 7
UFS-067 Lawn Mower Funnel Long Reach Spout or Small Engine Oil Funnel — image 1
1 / 7

UFS-067 Lawn Mower Funnel Long Reach Spout or Small Engine Oil Funnel

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

I’ve been collecting funnel ideas for awhile. I’ve downloaded parametric models that you can customize however you…

Rating
5 / 5
Likes
77
Downloads
677
Makes
3
Views
2,127
Reviews
6

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution

I’ve been collecting funnel ideas for awhile. I’ve downloaded parametric models that you can customize however you like. I also downloaded several with interesting shapes.

This was all because I needed a funnel with a long spout to reach the oil fill on a lawn mower and also a generator. The access is terrible, and I originally spilled a lot of oil trying to fill up the oil level.

Then I came across the Trailer Water Fill Funnel. I liked the flat side. That really helps bring the funnel closer to the side of the item being filled. It just needed an extra long spout.

I didn’t want to use supports, so I angled the top of the funnel. When printed upside down, the sides are steep enough that I didn’t need any support. You can add them if you want, but they can be a pain to remove from the spout.

There are two models. The first one I printer, and a second one with a slightly longer and narrower spout.

Beware, Cura didn’t like this model. I had voids in a couple of spots. I had to adjust settings to get it to print. Make sure you preview before printing.

Print Settings

Printer Brand:

Creality

Printer:

CR-10S

Rafts:

No

Supports:

No

Resolution:

0.2

Infill:

3 or more shells, 35% infill


Filament:

generic PLA any

Category: Machine Tools

Tags