1 / 7
Replacement studs for ice shoe grippers.
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement studs for ice shoe grippers.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 16
- Makes
- 0
- Views
- 169
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Winter & Christmas & New Year's
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a work in progress.
The plastic is not as good as the original metal cleats.
I plane on making a design that can take a metal insert such as a dull nail.
Use concentric supports at 10% and .2 separation.
use a brim
Print in ABS or better still PET-G
14.73 mm OD large disc x 1.55 mm thick
4.65 mm OD center stalk x 2 mm high
12.15 mm OD small disc x 2.0 mm thick
spikes 2.74 mm dia x 3.46 mm high
Use concentric supports at 10% and .2 separation.
use a brim
Print in ABS or better still PET-G