1 / 6
ratgdo 2.5i Enclosure with Wago 221 Lever-Nuts & M3 Self Tapping Support — image 1
1 / 6

ratgdo 2.5i Enclosure with Wago 221 Lever-Nuts & M3 Self Tapping Support

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Remix of the original ratgdo PCB Case along with the Wago bracket remix but for the self-tapping M3 screw case.

Rating
0 / 5
Likes
8
Downloads
65
Makes
0
Views
803
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

This is a remix of the original ratgdo PCB Case from @samwiseg0 along with the awesome remix from @PatrickONeal_471773 that added support for Wago connectors to improve wiring support – Wago connectors will change your life!

The original Wago integrated version noted that it was only for the case that used screw inserts (melting) and did not contain a version to support self-tapping M3 screws which is provided by the original PCB case version.

Notes:

  • Printed, Composited, & Exported with Cura v5.4.0
  • The Wago holders are a very tight fit and takes some force to insert, but once they are installed all clips open without any issues.


Print Settings (Same as Original PCB Version):

  • 4 Perimeters/walls
  • 5 top and bottom layers
  • 25% Gyrioid Infill
  • 0.4mm line width
  • Parts are pre oriented in the correct position for printing
  • No supports!