Audi B6 Vent Pod 52mm
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a pod for the boost gauge in my 2005 Audi A4 B6. I couldn't find anything created for this car to mount a gauge…
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 188
- Makes
- 1
- Views
- 791
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution
This is pod for the boost gauge in my 2005 Audi A4 B6. I couldn't find anything created for this car to mount a gauge and I didn't want to buy the replacement vent with the gauge in the centre. To install the vacuum line and power to the pod, I drilled a 1/4" hole through the air duct to feed the lines up through.
I had to wrap my actual gauge with a couple layers of tape for it sit snug.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
Yes
Resolution:
0.15mm
Infill:
15%
Filament: FlashForge PETG Natural
Notes:
I printed this in PETG but PLA or anything would work fine.
Category: Automotive