Anycubic Kobra 2 Max - cable protection
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.25 – €1.53 net (excluding VAT)
For file: kobra_2_max-0.2-1h26m-1-7.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.39 excluding VAT (range midpoint).
- Weight reported by the author
- 20 g
- Print time reported by the author
- 1.26 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Anycubic Kobra 2 Max - cable protection
- Rating
- 5 / 5
- Likes
- 48
- Downloads
- 394
- Makes
- 1
- Views
- 3,046
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Anycubic Parts & Upgrades
- License
- Creative Commons — Attribution
I saw that the cable for the print bed always run between the frame and the cross brace. Sooner or later the protective cover and the cable are defect or block the print bed when moving.
An energy chain is too long at the back for me, I don't have any space there.
So I modeled the red deflector. It has a strange shape, but it serves its purpose. I attach it to the cross member with a M5x25 screw and M5 nut, and to the frame with a cable tie as a precaution so that the deflector does not collide with the castors of the bed.
Maybe someone else can use this part too :-)
Have fun with it.
It can also used when this part is mounted on your “Anycubic Kobra 2 Max”: