1 / 4
Sigg / MSR Pour Spout
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a pour spout for Sigg / MSR bottles.
- Rating
- 5 / 5
- Likes
- 21
- Downloads
- 116
- Makes
- 2
- Views
- 815
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial
This is a pour spout for Sigg / MSR bottles. It's based off a few old pour caps I remember my dad using when I was a kid.
Features
- Separate air intake and liquid exit holes
- Universal fit for Sigg / MSR bottles
There are two variants:
V1:
- Wider head (10mm)
- Wider inner exit spout (6mm diameter)
- Wider inner air intake spout (4mm diameter)
- Beveled pour tip
- Small ring
V2:
- Narrower head (7mm)
- Narrower inner exit spout (3mm diameter)
- Narrower inner air intake spout (3mm diameter)
- Flat pour tip
- Larger ring
Print settings
- Infill: 60%
- Supports: only for the underneath of the flat base above the threads
- Material: I printed with PLA and it came out great. Other materials will likey work.
Caution
- If you are using this with fuel--like for a camping stove--be sure your material will not react with the liquid. I'm using standard liquid Coleman camping fuel, which doesn't react with PLA, and even then only attaching the spout when I need to pour something. Otherwise it has the supplied cap.
- Recommend using a rubber O-ring for a proper seal