Counting matching models…
Print settings Printer Brand: Creality Printer: Ender 3 S1 Pro Supports: Yes Support structure: Tree Support placement: Everywhere Support overhang: 75% (Important to disable supports for the thread) Infill: 60% Filament: Extrudr PLA NX-2…
Flaschen Trockner für SIGG Getränke Flaschen passend. Ohne irgendwelche Schrägen so steht die Flasche sicher ohne zu kippen. Gedruckt in PETG - weiss - keine Supports nötig - Infill 15% oder 20%
This is a pour spout for Sigg / MSR bottles. It's based off a few old pour caps I remember my dad using when I was a kid. Features Separate air intake and liquid exit holes Universal fit for Sigg / MSR bottles There are two variants: V1:…
Turn PET soda bottles or Sigg water bottles into air tanks for fischertechnik pneumatic applications. Both kinds of bottles are suited for compressed air up to at least 1 bar, the Sigg metal bottles are perfect for vacuums. The PET…
This is not my own design. I found it on Thingiverse, created by user bodoba . The original part on these Sigg bottles is not strong enough and I saw it breaking on multiple bottles. On Printables, I found multiple latches for the Sigg…
It seems to be a usual problem, that the closure shutter of the Sigg Tritan bottle breaks - especially if you have children :-) There are more versions out there, but I think my version has the angled design of the pins, which is also 1:1…
Because I couldn't find a variant for the thermos-bottle, I put this one up here.
Lucy and Siggi from Fallout. Not sure if this fits anywhere in the timeline. But I do seem to remember her carrying Siggies head in a sack of some sort.
3d model of a Siggi's brand yogurt cup, and a 3d printable lid that snap fits to the cup. Intended to support waste reuse.
The lock on my Sigg Bottle broke so I designed a new version of it and printed it. ------------------------------------------------------------------------------------------------ Der Verschluss meiner Sigg Flasche ist gebrochen und ich…
the cap on our bottle broke. so a replacement had to be found. I recommend printing in ABS Like Resin FDM pressure is also possible here, but the bolt arms only break more easily Category: Replacement Parts
The original modell “Bottle Dryer System v2” did not fit and the bottle fall down from time to time. Also the lower radius was not optimal for the Sigg bottles or botles with a medium hole of approx. 25-30mm. So i remove the radius and…
I often carry my aluminum bottle in the side pocket of my backpack where the bottle is exposed to frequent mechanical damage 🏔 . Hopefully, this cover will partially prevent it. Print instructions ⬢ Material: Prusament PETG Carmine Red…
Now that we have a SIGG bottle with 60mm opening, we needed a holder to let the water drip off. Also fits for AirUp Bottles. I printed the bottle stand in 0.3 Draft.
Simple replacement divider for Swiss manufacturer SIGG. Fits regular SIGG lunchbox. Printed with 40% triangle infill for a decent balance between rigidity and flexiblity.
A bottle cap lace for Sigg bottles. Simply thread a small string through the printed clip and the bottle cap, and you're ready to go!
With this closure I have repaired my Sigg drinking bottle. For printing you will need a support between the clamps.
There was no replacement available from Sigg - didn't know that mine was so old ;-) Made in Fusion360 and is simple replacing the original sealing with a TPU part. To make it easy to print I added the internal zylinder to avoid supports.…
Replacement Feet for SIGG 6354 Fondue Rechaud. Print in PETG or ABS (heat) without support Ersatz-Füße für das SIGG 6354 Fondue-Rechaud. Am besten in PETG oder ABS drucken (wg. Hitze). Kein Support notwendig
Replacement Feet for SIGG 6354 Fondue Rechaud. Print in PETG or ABS (heat) without support Ersatz-Füße für das SIGG 6354 Fondue-Rechaud. Am besten in PETG oder ABS drucken (wg. Hitze). Kein Support notwendig
Hello, For my Bikepacking Trips I designed a bottle holder for a SIGG water bottle under the lower tube of my bike. The bottle has a volume of 0,5L I believe.
This is a pour spout for Sigg / MSR bottles. It's based off a few old pour caps I remember my dad using when I was a kid. Features Separate air intake and liquid exit holes Universal fit for Sigg / MSR bottles There are two variants: V1:…
The bottle holder can be attached to any metal surface. For heavy bottles you need a limit at the bottom otherwise it will slowly move downwards. It was designed for a water bottle with a diameter of 70mm and one for 73 mm. You also need…
PLA or PETG can be used 0.2 mm layer height 0.4 mm nozzle
I use my SIGG bottle as a travel bottle. It's durable and a great size. Previously I've used the “sport cap” which is large and bulbous, because it has sides which protect the bottle's drinking surface. My backpack has unprotected side…
I bought a new water bottle - a sigg shield one with 0.75l capacity. My former bottle was made of plastic and I tried to balance it somehow after every usage in a way that the remaining water could drop out and the bottle could dry…
a friend asked me to print a replacement for his kids sigg bottles, becaus he has already 8 broken pieces at home. printed in TPU and now its fine and ready for the rough use of his two boys.
Hello, For my Bikepacking Trips I designed a bottle holder for a SIGG water bottle under the lower tube of my bike. The bottle has a volume of 0,5L I believe.
Since my daughter lost her original cap, I decided to make a new one. This cap should fit on all SIGG Kids Bottles utilizing their KBT fastener. Supports are needed at least for the outer rim. If you print slow enough you might get away…
