Ritewing Mini Drak RX Cover Hinged
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Ritewing Mini Drak RX Bay cover, hinged. Designed to fit as direct drop in for stock coraplast bay covers.…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 12
- Makes
- 0
- Views
- 89
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Ritewing Mini Drak RX Bay cover, hinged.
Designed to fit as direct drop in for stock coraplast bay covers.
Introduction
Fitting UHF dipole vertically with both elements above the craft.
Two small naca ducts provide some cooling intake.
There are x2 Lid versions - one with tube adapter combined and one separate.
Fits the stock M6 screws securing the lid.
Recommended print materials:
Used 100% infill for all parts.
- PLA.
- PETG.
- ABS
Parts and bits
- Glue - E6000
- Hinge axis - I've used 1mm dia. paper clip. (Any 1 mm dia. steel wire will do)
- Antenna tube - x10 Antenna Tubes 2mm ID 3 mm OD
Assembly instructions
- Glue adapter into lid using CA.
- Insert hinge axis (1mm dia.), trim to length.
- Glue into adapter the antenna tube.
- Glue onto craft using E6000 glue.
- Insert antenna into tube secure using some hot glue.
- Secure feed line to lid using some hot glue.
Revisions Tracking
26.02.2019 - Initial release.
Will be happy to modify or adjust if someone needs something else.
Happy flying.
Category: R/C Vehicles