20mm Magnet Mount for 2040 Extrusion
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A quick print to add two 20mm diameter x 2.5mm magnets to any printer with 2040 extrusion.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 22
- Makes
- 0
- Views
- 202
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
A quick print to add two 20mm diameter x 2.5mm magnets to any printer with 2040 extrusion.
The part is designed to accommodate the magnets with a press fit, so depending on the tolerances of your printer, it may need to be resized appropriately in your slicer. It uses two M4 x 8mm screws and matching M4 T-nuts to secure it to the 2040 extrusion of your choosing.
BE ADVISED: When installing the part, the magnets may interfere with the function of the T-nuts. So it is best to install the part, then press fit the magnets if possible.