1 / 7
kallax prusament filament spool knob
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Ikea Kallax knob in the style of a prusament filament spool
- Rating
- 5 / 5
- Likes
- 22
- Downloads
- 55
- Makes
- 2
- Views
- 334
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Replacement “spool 2” part for kallax filament spool knob or Kallax Filament Spool Knob flatter in the style of a prusament spool. You need the “spool 1” and “filament” parts of one of those models.
I liked the look from the front better than just a solid circle.
I included two versions
- “Original height” is the same height as “spool 2” from the “flatter” version and has a bit of room to allow the filament insert to spin
- “Reduced height” is reduced by 0.5mm and fixes the filament insert so that is cannot move anymore.
Like the “flatter” version, this was scaled to 99% to make screwing the parts together easier
I included the 3mf project file with both versions if you require any additional adjustments.